Part 1: POS硬碟 ghost到外接USB硬碟

1. 使用Knoppix CD開機. (以knoppix 2指令進入text mode)
2. 連接USB disk (一定要有FAT32分割區, NTFS分割區linux不能寫入)
3. 檢查POS硬碟及USB硬碟 的device名稱
  -> fdisk -l 
4. "掛上" USB硬碟
  -> mkdir /bk
  -> mount /dev/sda3 /bk
  -> cd /bk/pos462 (或/bk/sr610, /bk/ht4000..)

5. 儲存POS硬碟的MBR及磁碟主分割區
  ->dd if=/dev/hda of=hda.mbr count=1 bs=512

6. 儲存POS硬碟的第一個partition
  -> partimage -z1 -b -V0 -o -d save /dev/hda1 server.gz
  或 partimage -z1 -b -V0 -o -d save /dev/hda1 client.gz

==================================================================
Part 2: Restore the Image to a New Drive on a Different Computer

1. boot with Knoppix CD. 
2. 連接 USB disk 
3. 檢查POS硬碟及USB硬碟 的device名稱
  -> fdisk -l 
4. "掛上" USB硬碟
  -> mkdir /bk
  -> mount /dev/sda3 /bk
  -> cd /bk/sr610 (或/bk/pos462, /bk/ht4000..)

5. 新的HDD建置MBR. 
  -> dd if=hda.mbr of=/dev/hda
   .. 將partition table 存入到新的HDD
      (這一步作好後, 如果用partimage看不到hda1/hda2就試重開機, 應該就可以了)

6. restore第一個磁碟分割
  -> partimage -b restore /dev/hda1 server.gz
  或 partimage -b restore /dev/hda1 client.gz